Machinery Portal
BT Floater in Delhi
Technical Intelligence
Model
BT Floater 100
Engine Type
Petrol Honda GX160
Power
5.5 HP
Working Width
1000 mm
Blade Size
350 mm x 150 mm
Blade Quantity
4
Fuel Tank Capacity
3.6 L
Weight
90 Kg
Speed
70–130 RPM
Application
Surface Finishing & Smoothing
The BT Floater is a high-performance concrete finishing machine for surface finishing in construction work. Made with precision and long life in mind, the machine is suitable for finishing and polishing of floors of concrete using ease. The machine has a lightweight make and ergonomic design to ensure comfort and ease of maneuverability during use. Whether used in small spaces or large construction sites, the BT Floater ensures a flawless finish, increasing the productivity and efficiency of your workforce. It is widely adopted in industrial, residential, and commercial flooring projects due to its consistent performance and low maintenance requirements.
Technical Variants
| Usage/Application | Laser Levelling Machine |
| Rated Motor Power | 1200 Watt |
| Surface Recommendation | Granite, Marble |
| Drive Type | Gear Box Drive |
| Current Type | 220-240 V | 50 Hz |
| Motor Phase | Single Phase |
| Noise Level | Less than 70 dB |
| Weight | 741 kg |
| Country of Origin | Made in India |
| Usage/Application | Bull Float |
| Blade Material | Magnesium |
| Width | 36 |
| Brand | Topall |
| Finishing | Smooth |
| Operating Mode | Manual |
| Length | 24 - 28 inch |
| Bracket Material | Cast Aluminum |
| Bracket Type | Worm Gear |
| Country of Origin | Made in India |
| Usage/Application | Bump Cutter |
| Handle Length | 1.8 m |
| Operation Mode | Manual |
| Brand | Topall |
| Blade Lenght | 3 m |
| Number of handles | 3 Pcs |
| package size | 3040 x 90 x 140 mm |
| Weight | 13 Kg |
| Screed Material | Aluminum |
| Country of Origin | Made in India |
| Model | CVS25C - CVS25E |
| Weight (Kgs) | 20 - 25 |
| Dimension (mm) | 2000 × 200 × 960 |
| Drive | Flexible Shaft , Shutter Motor |
| Power | Air Cooled, 4-Cycle, Gasoline , Three Phase Electrical |
| Type | Honda GX35, Imported |
| Max Output | 0.2 HP - 1.2 HP |
| Fuel Tank (Gal) | 0.65 (0.17) |
| Usage/Application | Groove Cutter |
| Driving Method | Manual Push |
| Engine Type | Honda GX270 Petrol |
| Operation Mass | 90 Kg |
| Water Tank Capacity | 35 L |
| Depth Adjustment | Handle Rotation |
| Engine | Air-cooled,4- cycle,single cylinder |
| Blade Size | 12-20 inches |
| Model | CQF16 |
| Country of Origin | Made in India |
| Usage/Application | Ride on Trowel |
| Material | Power Trowel |
| Power | 34 Hp |
| Disc Thickness | 3 mm |
| Weight | 598 Kg |
| Size | 2540 * 1240 * 1485 (mm) |
| Round Disc Blade Diameter | 1200 mm |
| Quantity Of Blade | 10 blades |
| Engine Type | Kohler CH 940 |
| Country of Origin | Made in India |
| Usage/Application | Power Trowel |
| Working Diameter | 915 mm |
| Dimensions | 1820 x 945 x 980 mm |
| Engine Power | 5 HP |
| Model | CWD 40 |
| Oil Tank Capacity | 3.6 L |
| Pan Quantity | 1 Piece |
| Blade Quantity | 4 Pieces |
| Working Speed | 70-125 RPM |
| Country of Origin | Made in India |
| Model | QJM 600 |
| Working Diameter (mm) | 600 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 53 |
| Dimension (mm) | 1460 × 660 × 980 |
| Usage/Application | High Frequency Vibrators |
| Input Voltage | 115 |
| Power | 42v |
| Model Name/Number | HVU110 |
| Brand | Topall |
| Output Power | 2.3kw |
| Input Phase | Three Phase |
| Speed | 18000 |
| Phase | 3 |
| Country of Origin | Made in India |
| Usage/Application | Hardener Spreader |
| Automation Grade | Semi Automatic |
| Product Type | Hardner Material spreader |
| Brand | Topall |
| Roller Type | Semi Automatic |
| Capacity | 100 kg |
| Material | Stainless Steel |
| Fuel Tank Capacity | 12 |
| Minimum order quantity | 1 Number |
| Country of Origin | Made in India |
| Usage/Application | Walk Behind Laser Screed Machines |
| Rated Motor Power | 1200 Watt |
| Surface Recommendation | Granite, Marble |
| Drive Type | Gear Box Drive |
| Current Type | 220-240 V | 50 Hz |
| Motor Phase | Single Phase |
| Noise Level | Less than 70 dB |
| Weight | 741 kg |
| Country of Origin | Made in India |
| Model | GT 250 |
| Weight (KG) | 160 |
| Dimension (MM) | 1050x500x100 |
| Working Width (MM) | 5~8 |
| Voltage | 451V, 50/60 Hz, 3 Phase |
| Cutter Quantity (PCS) | 108 |
| Model | GT-630 |
| Weight (KG) | 300 |
| Voltage (V) | 380 |
| Working Width (MM) | 600 |
| Inverter (KW) | 7.5 |
| Motor Power (KW) | 7.5 |
| Mill Speed (RPM) | 0-1800 |
| Model | GT330 / GT400 |
| Motor Power | 4KW / 3KW |
| Inverter Speed | 1450 r/min / 900 r/min |
| Power Supply | 380V |
| Weight | 145 KG / 75 KG |
| Vacuum Motor Power | 750W / - |
| Dimension (L×W×H) | 1100x460x980 |
| Model | CQF 20 / CQF 28 / CQF 40 |
| Blade Size | 12-20 in / 16-28 in / 20-40 in |
| Cutting Depth | 160 mm / 225 mm / 400 mm |
| Engine Type | Honda / Greaves / Electric Motor / VST Shakti Engine |
| Power (HP) | 5/9 HP / 9/13 HP / 15/20/25 HP |
| Water Tank | 35 Ltr / 30 Ltr / 40 Ltr |
| Depth Adjustment | Handle Rotation |
| Weight | 95 kg / 180 kg / 280 kg |
| Model | QUM-80 |
| Blade Quantity | 8 Pcs |
| Pan Quantity | 2 Pcs |
| Working Speed | 120-140 RPM |
| Working Diameter | 1900x915 mm |
| Engine | Honda GX690 24HP |
| Max Speed | 3600 RPM |
| Fuel Tank Capacity | 12 Ltr |
| Disc Diameter | 940 mm |
| Spare Parts | Combination Blade |
| Pan | Made of 3mm Thickness, Manganese Steel (2 Pcs) |
| Dimension (mm) | 1980x996x1320 |
| Weight (Kg) | 310 |
| Model | CWT 40 / CWT 40L / DMR 900 |
| Working Diameter (mm) | 900 / 915 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 100 / 120 |
| Dimension (mm) | 1280x945x980 |
| Model | BT 900 - 2PF H24 |
| Type | BT Low Riders |
| Engine Type | Honda GX 690, 24HP |
| Blade Rotation Speed | 0-140 RPM |
| Float Pans | Yes |
| Blades | 8 Pcs |
| Dimensions (mm) | 1940x990x1040 |
| Weight Dry (kg) | 275 |
| Model | BT-60H |
| Working Diameter (mm) | 600 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 53 |
| Dimension (mm) | 1460x660x980 |
| Model | BT-90H |
| Working Diameter (mm) | 900 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 120 |
| Dimension (mm) | 1280 × 945 × 980 |
| Model | BTFC/45/4, BTFC200/18/2 |
| Capacity | 1.8KVA, 4.5KVA |
| Input (Phase/Hz/V/A) | 3Ph/ 50 / 380 / 2.8, 3Ph/ 50 / 380 / 8.3 |
| Output (Phase/Hz/V/A) | 3Ph/ 200 / 48 / 22, 3Ph/ 200 / 48 / 54 |
| Weight | 37 Kgs, 78 Kgs |
| Units Driving | 2 Needles, 4 Needles |
| Model | HVU110, HVU220 |
| Voltage | 115V, 230V |
| Power (Kw) | 2.3 |
| Motor Speed | 18000 |
| Weight | 5.5Kg |
| Model | HDV38/2, HDV38/4 |
| Dia | 38mm |
| Length | 2m, 4m |
| Weight | 6.26kg, 8.86kg |
| Frequency | 16200 |
| Amplitude | 1.54 |
| Model | LS-325 |
| Generator | Honda EC2500 x (2.6Kw, Single Cylinder Four Stroke Generator Set) |
| Package | Box 1:2700*1050*1350mm Box2:2900*750*320 |
| Laser Generator | LEICA (Switzerland) (635nm visible laser, self-leveling, level error<+1.5mm/30m, effective lanuch distance 300m) |
| Laser Receiver | LEICA (Switzerland) (effective receiving distance 300m, accuracy of dead zone<+2.5mm) |
| Control System | Ac Servo System |
| Driving System | Phase (Italian) (steeples adujustment, turning faster than 1:2:5) |
| Airframe Adjustment | Level Sensor automatic adjusting system |
| Slope Working | Single Phase Slope Automatic Adjustment |
| Wheel Tyre | 733nm ATV (1.8-2.2BAR)/3.0-21 narrow tyre (1.6-2. 1 BAR) |
| Virating System | Eccentric Vibration Moror, 300Hz |
| Centrifugal Force | 100 Kgs |
| Vibrating System | Aluminium Alloy |
| Scraper Blade | Aluminium Alloy |
| Scraper Adjustment | Computer Control, Automatic Adjustment |
| Working Length | 2.6M |
| Reverse Speed | 2.5Km/H |
| Min. Ground Clearance | 355mm |
| Ground Flatness | <+7mm/100m |
| Max Working Radius | <200mm |
| Working | 200m2/h--350m2/h |
| Dimension (L*W*H) | 2748*2900*2044 |
| Weight | 230Kgs |
| Model | LS-400 |
| Engine Model | Kholer Ch620 |
| Engine Type | Petrol, V-cylinder engine, air cooling |
| Engine Power (Kw) | 14.2 |
| Lubrication Oil (L) | 2 |
| Fuel Tank Capacity (L) | 35 |
| Type of Leveling | Independent suspension, center rotation |
| Paving Width (mm) | 2500 |
| Paving Way | scraper blade paving |
| Paving Thickness (mm) | 30-200 |
| Boom Motor | High torque hydraulic motor |
| Vibrating System Control | Vibrating Motor |
| Exciting force (kg) | 100 |
| Vibrational Frequency (hz) | 50 |
| Laser System Control Type | Laser Scanning + High Sensitivity DC Push road |
| Laser System Control Effect | Flat surface, slope Floor |
| Driving System | Hydraulic driving tyre |
| Wheel | Heavy-duty tyre |
| Walking Speed (km/h) | 0-2.5 |
| Forword/backward | Switch Control, Stepless speed |
| Turing | Switch Control |
| Dimension (mm) | 3155x3175x1910 |
| Weight | 741 |
| Model Name | Concrete Paver XP-900 |
| Paving Width | 3.5 to 9 Meters |
| Engine Power | 110 HP Diesel Engine |
| Paving Speed | 0–5 M/min |
| Working Efficiency | 400 m²/hour |
| Vibration System | High-Frequency Vibration Motor |
| Leveling Accuracy | ±2 mm |
| Control Panel | Digital Smart Control System |
| Fuel Tank Capacity | 80 Litres |
| Weight | 2600 Kg |
| Model Name | BT Edger Trowel |
| Trowel Diameter | 24 Inches |
| Engine Type | Honda GX160 / Equivalent |
| Power | 5.5 HP |
| Trowel Speed | 60–125 RPM |
| Blade Size | 9 x 4 inches |
| Weight | 70 Kg (Approx.) |
| Operating Handle | Foldable with Adjustable Height |
| Application | Edge Finishing of Concrete Floors |
| Country of Origin | India |
| Model | GX65 Grinding Machine |
| Grinding Wheel Size | 300 mm |
| Power Supply | 3 Phase, 415V |
| Motor Capacity | 5 HP |
| Table Size | 600 x 300 mm |
| Surface Finish | ≤ 2 Micron |
| Max Workload | 200 kg |
| Cooling System | Integrated |
| Material Suitability | Steel, Cast Iron, Alloys |
| Brand | Topall Impex |
| Model | IVC-F33L |
| Type | Industrial Vacuum Cleaner |
| Power | 3300 Watts |
| Voltage | 220V / 50Hz |
| Tank Capacity | 60 Liters |
| Material | Stainless Steel |
| Filter Type | HEPA + Cloth Filter |
| Noise Level | ≤ 78 dB |
| Mobility | 4-Wheel Portable |
| Brand | Topall Impex |
| Model | Sino S300 |
| Type | Surface Grinding Machine |
| Grinding Area | 600 x 300 mm |
| Motor Power | 5 HP |
| Table Load Capacity | 250 kg |
| Voltage | 415V AC |
| Wheel Speed | 2800 RPM |
| Cooling System | Integrated Coolant Tank |
| Operation | Semi-Automatic |
| Brand | Topall Impex |
| Model | HTG-820C |
| Type | Autopilot Planetary Grinder |
| Working Width | 820 mm |
| Grinding Disc | 3 x 300 mm |
| Voltage | 380V / 3 Phase |
| Motor Power | 15 KW |
| Rotation Speed | 350–1950 rpm |
| Weight | 585 kg |
| Water Tank Capacity | 20 Liters |
| Application | Concrete, Stone, Epoxy Floors |
| Model Name | IVC-45L |
| Working Width | 820 mm |
| Grinding Disc | 4 Discs / 12 Heads |
| Motor Power | 15 HP (11 kW) |
| Voltage | 380V-440V 3 Phase |
| Speed Range | 300–1800 RPM |
| Water Tank Capacity | 20 Litres |
| Net Weight | 580 kg |
| Transmission | Gear Drive + Belt Drive |
| Application | Concrete Floor Grinding & Polishing |
| Model | 995 LE |
| Grinding Width | 800 mm |
| Power Output | 15 HP |
| Voltage | 380V, 3-Phase |
| Grinding Disc Speed | 300–1800 RPM |
| Weight | 600 Kg |
| Grinding Pressure | Adjustable |
| Dust Collection Port | Yes |
| Operation Mode | Manual & Auto |
| Application Area | Concrete, Stone, Epoxy Removal |
| Model | GX688-4A |
| Power Output | 15 HP |
| Voltage | 380V |
| Working Width | 680 mm |
| Grinding Heads | 4 |
| Speed | 300–1800 RPM |
| Water Tank Capacity | 30 Liters |
| Machine Weight | 410 Kg |
| Dust Extraction Port | Yes |
| Application Area | Industrial/Commercial Floors |
| Model | GT250 |
| Motor Power | 3 HP |
| Voltage | 220V / 50Hz |
| Grinding Width | 250 mm |
| Disc Speed | 1400 RPM |
| Weight | 65 kg |
| Dust Port | Yes |
| Application Area | Concrete, Marble, Epoxy |
| Frame Material | Heavy-duty Steel |
| Operation | Manual Push Type |
| Model | GT630 |
| Grinding Width | 630 mm |
| Motor Power | 10 HP |
| Voltage | 380V / 3 Phase |
| Speed Range | 300–1800 RPM |
| Working Pressure | Adjustable |
| Tool Holder | 3 Planetary Plates |
| Weight | 340 kg |
| Application | Floor Grinding & Polishing |
| Dust Port | Yes (vacuum compatible) |
| Model | GT330 |
| Motor Power | 4 kW / 5.5 HP |
| Voltage | 380V / 3 Phase |
| Grinding Width | 330 mm |
| Disc Speed | 300–1200 RPM |
| Number of Discs | 3 |
| Weight | 150 kg |
| Water Tank Capacity | 30 L |
| Application | Floor Grinding & Polishing |
| Usage | Industrial / Commercial |
| Model | HTG-460 |
| Grinding Width | 460 mm |
| Motor Power | 4 kW |
| Voltage | 220V / 380V |
| Phase | Single / Three Phase |
| Rotation Speed | 300–1600 RPM |
| Tool Holder Type | Magnetic Plate |
| Water Tank Capacity | 20 Liters |
| Machine Weight | 150 kg |
| Application | Concrete, Terrazzo, Epoxy Floor |
| Model | 580-2 Grinding Machine |
| Power | 7.5 HP |
| Voltage | 380V |
| Working Width | 580 mm |
| Grinding Heads | Dual |
| Weight | 180 Kg |
| Rotation Speed | 300–1800 rpm |
| Water Tank | 30 Liters |
| Application Area | Concrete, Epoxy Removal |
| Usage Type | Industrial / Commercial Floors |
If you're seeking reliable BT Floater Machine Suppliers in Delhi, Topall Impex is your one-stop destination. We present to you top-notch concrete finishing machines for precision, reliability, and performance. As leading suppliers in the industry, we know your particular requirements as contractors and construction experts in Delhi and provide equipment that does not fall short of your expectations.
Our BT Floater Machines are engineered to provide top-of-the-line surface finishing on concrete slabs and floors. From housing projects to industrial construction, the clients of Delhi prefer our machines because they are reliable and function effectively in producing smooth results with minimal effort from each unit.
Topall Impex provides on-time delivery, accurate support, and reasonable prices to customers in Delhi. You can get product demonstrations, technical assistance, and spare part information from us. We are a supplier, not only a supplier—but your construction machinery solution partner in Delhi.
By selecting us as your BT Floater Machine Suppliers in Delhi, you are assured of unparalleled quality, durable equipment, and expert service. Call us today for bulk or tailored orders and take your concrete finishing business to the next level using our superior machines.