Machinery Portal
BT Ride On Trowel in Delhi
Technical Intelligence
Model Name
Concrete Paver XP-900
Paving Width
3.5 to 9 Meters
Engine Power
110 HP Diesel Engine
Paving Speed
0–5 M/min
Working Efficiency
400 m²/hour
Vibration System
High-Frequency Vibration Motor
Leveling Accuracy
±2 mm
Control Panel
Digital Smart Control System
Fuel Tank Capacity
80 Litres
Weight
2600 Kg
BT Ride On Trowel is a sophisticated finishing machine for concrete, ideal for heavy-duty flooring operations. Featuring double rotors and high-performance motors, it provides extra-compact and even finish in a shorter time. Ergonomic design, intuitive controls, and heavy-duty frame qualify it for tough construction site use. Whether used on warehouses, industrial floors, or parking lots, this Topall Impex ride-on trowel optimizes efficiency and provides consistent performance. Low on vibrations and high on control, it provides operator comfort during extended working hours.
Technical Variants
| Usage/Application | Laser Levelling Machine |
| Rated Motor Power | 1200 Watt |
| Surface Recommendation | Granite, Marble |
| Drive Type | Gear Box Drive |
| Current Type | 220-240 V | 50 Hz |
| Motor Phase | Single Phase |
| Noise Level | Less than 70 dB |
| Weight | 741 kg |
| Country of Origin | Made in India |
| Usage/Application | Bull Float |
| Blade Material | Magnesium |
| Width | 36 |
| Brand | Topall |
| Finishing | Smooth |
| Operating Mode | Manual |
| Length | 24 - 28 inch |
| Bracket Material | Cast Aluminum |
| Bracket Type | Worm Gear |
| Country of Origin | Made in India |
| Usage/Application | Bump Cutter |
| Handle Length | 1.8 m |
| Operation Mode | Manual |
| Brand | Topall |
| Blade Lenght | 3 m |
| Number of handles | 3 Pcs |
| package size | 3040 x 90 x 140 mm |
| Weight | 13 Kg |
| Screed Material | Aluminum |
| Country of Origin | Made in India |
| Model | CVS25C - CVS25E |
| Weight (Kgs) | 20 - 25 |
| Dimension (mm) | 2000 × 200 × 960 |
| Drive | Flexible Shaft , Shutter Motor |
| Power | Air Cooled, 4-Cycle, Gasoline , Three Phase Electrical |
| Type | Honda GX35, Imported |
| Max Output | 0.2 HP - 1.2 HP |
| Fuel Tank (Gal) | 0.65 (0.17) |
| Usage/Application | Groove Cutter |
| Driving Method | Manual Push |
| Engine Type | Honda GX270 Petrol |
| Operation Mass | 90 Kg |
| Water Tank Capacity | 35 L |
| Depth Adjustment | Handle Rotation |
| Engine | Air-cooled,4- cycle,single cylinder |
| Blade Size | 12-20 inches |
| Model | CQF16 |
| Country of Origin | Made in India |
| Usage/Application | Ride on Trowel |
| Material | Power Trowel |
| Power | 34 Hp |
| Disc Thickness | 3 mm |
| Weight | 598 Kg |
| Size | 2540 * 1240 * 1485 (mm) |
| Round Disc Blade Diameter | 1200 mm |
| Quantity Of Blade | 10 blades |
| Engine Type | Kohler CH 940 |
| Country of Origin | Made in India |
| Usage/Application | Power Trowel |
| Working Diameter | 915 mm |
| Dimensions | 1820 x 945 x 980 mm |
| Engine Power | 5 HP |
| Model | CWD 40 |
| Oil Tank Capacity | 3.6 L |
| Pan Quantity | 1 Piece |
| Blade Quantity | 4 Pieces |
| Working Speed | 70-125 RPM |
| Country of Origin | Made in India |
| Model | QJM 600 |
| Working Diameter (mm) | 600 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 53 |
| Dimension (mm) | 1460 × 660 × 980 |
| Usage/Application | High Frequency Vibrators |
| Input Voltage | 115 |
| Power | 42v |
| Model Name/Number | HVU110 |
| Brand | Topall |
| Output Power | 2.3kw |
| Input Phase | Three Phase |
| Speed | 18000 |
| Phase | 3 |
| Country of Origin | Made in India |
| Usage/Application | Hardener Spreader |
| Automation Grade | Semi Automatic |
| Product Type | Hardner Material spreader |
| Brand | Topall |
| Roller Type | Semi Automatic |
| Capacity | 100 kg |
| Material | Stainless Steel |
| Fuel Tank Capacity | 12 |
| Minimum order quantity | 1 Number |
| Country of Origin | Made in India |
| Usage/Application | Walk Behind Laser Screed Machines |
| Rated Motor Power | 1200 Watt |
| Surface Recommendation | Granite, Marble |
| Drive Type | Gear Box Drive |
| Current Type | 220-240 V | 50 Hz |
| Motor Phase | Single Phase |
| Noise Level | Less than 70 dB |
| Weight | 741 kg |
| Country of Origin | Made in India |
| Model | GT 250 |
| Weight (KG) | 160 |
| Dimension (MM) | 1050x500x100 |
| Working Width (MM) | 5~8 |
| Voltage | 451V, 50/60 Hz, 3 Phase |
| Cutter Quantity (PCS) | 108 |
| Model | GT-630 |
| Weight (KG) | 300 |
| Voltage (V) | 380 |
| Working Width (MM) | 600 |
| Inverter (KW) | 7.5 |
| Motor Power (KW) | 7.5 |
| Mill Speed (RPM) | 0-1800 |
| Model | GT330 / GT400 |
| Motor Power | 4KW / 3KW |
| Inverter Speed | 1450 r/min / 900 r/min |
| Power Supply | 380V |
| Weight | 145 KG / 75 KG |
| Vacuum Motor Power | 750W / - |
| Dimension (L×W×H) | 1100x460x980 |
| Model | CQF 20 / CQF 28 / CQF 40 |
| Blade Size | 12-20 in / 16-28 in / 20-40 in |
| Cutting Depth | 160 mm / 225 mm / 400 mm |
| Engine Type | Honda / Greaves / Electric Motor / VST Shakti Engine |
| Power (HP) | 5/9 HP / 9/13 HP / 15/20/25 HP |
| Water Tank | 35 Ltr / 30 Ltr / 40 Ltr |
| Depth Adjustment | Handle Rotation |
| Weight | 95 kg / 180 kg / 280 kg |
| Model | QUM-80 |
| Blade Quantity | 8 Pcs |
| Pan Quantity | 2 Pcs |
| Working Speed | 120-140 RPM |
| Working Diameter | 1900x915 mm |
| Engine | Honda GX690 24HP |
| Max Speed | 3600 RPM |
| Fuel Tank Capacity | 12 Ltr |
| Disc Diameter | 940 mm |
| Spare Parts | Combination Blade |
| Pan | Made of 3mm Thickness, Manganese Steel (2 Pcs) |
| Dimension (mm) | 1980x996x1320 |
| Weight (Kg) | 310 |
| Model | CWT 40 / CWT 40L / DMR 900 |
| Working Diameter (mm) | 900 / 915 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 100 / 120 |
| Dimension (mm) | 1280x945x980 |
| Model | BT 900 - 2PF H24 |
| Type | BT Low Riders |
| Engine Type | Honda GX 690, 24HP |
| Blade Rotation Speed | 0-140 RPM |
| Float Pans | Yes |
| Blades | 8 Pcs |
| Dimensions (mm) | 1940x990x1040 |
| Weight Dry (kg) | 275 |
| Model | BT-60H |
| Working Diameter (mm) | 600 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 53 |
| Dimension (mm) | 1460x660x980 |
| Model | BT-90H |
| Working Diameter (mm) | 900 |
| Engine Type | Honda GX 160 |
| Max. Output (HP) | 5.5 |
| Weight (Kg) | 120 |
| Dimension (mm) | 1280 × 945 × 980 |
| Model | BTFC/45/4, BTFC200/18/2 |
| Capacity | 1.8KVA, 4.5KVA |
| Input (Phase/Hz/V/A) | 3Ph/ 50 / 380 / 2.8, 3Ph/ 50 / 380 / 8.3 |
| Output (Phase/Hz/V/A) | 3Ph/ 200 / 48 / 22, 3Ph/ 200 / 48 / 54 |
| Weight | 37 Kgs, 78 Kgs |
| Units Driving | 2 Needles, 4 Needles |
| Model | HVU110, HVU220 |
| Voltage | 115V, 230V |
| Power (Kw) | 2.3 |
| Motor Speed | 18000 |
| Weight | 5.5Kg |
| Model | HDV38/2, HDV38/4 |
| Dia | 38mm |
| Length | 2m, 4m |
| Weight | 6.26kg, 8.86kg |
| Frequency | 16200 |
| Amplitude | 1.54 |
| Model | LS-325 |
| Generator | Honda EC2500 x (2.6Kw, Single Cylinder Four Stroke Generator Set) |
| Package | Box 1:2700*1050*1350mm Box2:2900*750*320 |
| Laser Generator | LEICA (Switzerland) (635nm visible laser, self-leveling, level error<+1.5mm/30m, effective lanuch distance 300m) |
| Laser Receiver | LEICA (Switzerland) (effective receiving distance 300m, accuracy of dead zone<+2.5mm) |
| Control System | Ac Servo System |
| Driving System | Phase (Italian) (steeples adujustment, turning faster than 1:2:5) |
| Airframe Adjustment | Level Sensor automatic adjusting system |
| Slope Working | Single Phase Slope Automatic Adjustment |
| Wheel Tyre | 733nm ATV (1.8-2.2BAR)/3.0-21 narrow tyre (1.6-2. 1 BAR) |
| Virating System | Eccentric Vibration Moror, 300Hz |
| Centrifugal Force | 100 Kgs |
| Vibrating System | Aluminium Alloy |
| Scraper Blade | Aluminium Alloy |
| Scraper Adjustment | Computer Control, Automatic Adjustment |
| Working Length | 2.6M |
| Reverse Speed | 2.5Km/H |
| Min. Ground Clearance | 355mm |
| Ground Flatness | <+7mm/100m |
| Max Working Radius | <200mm |
| Working | 200m2/h--350m2/h |
| Dimension (L*W*H) | 2748*2900*2044 |
| Weight | 230Kgs |
| Model | LS-400 |
| Engine Model | Kholer Ch620 |
| Engine Type | Petrol, V-cylinder engine, air cooling |
| Engine Power (Kw) | 14.2 |
| Lubrication Oil (L) | 2 |
| Fuel Tank Capacity (L) | 35 |
| Type of Leveling | Independent suspension, center rotation |
| Paving Width (mm) | 2500 |
| Paving Way | scraper blade paving |
| Paving Thickness (mm) | 30-200 |
| Boom Motor | High torque hydraulic motor |
| Vibrating System Control | Vibrating Motor |
| Exciting force (kg) | 100 |
| Vibrational Frequency (hz) | 50 |
| Laser System Control Type | Laser Scanning + High Sensitivity DC Push road |
| Laser System Control Effect | Flat surface, slope Floor |
| Driving System | Hydraulic driving tyre |
| Wheel | Heavy-duty tyre |
| Walking Speed (km/h) | 0-2.5 |
| Forword/backward | Switch Control, Stepless speed |
| Turing | Switch Control |
| Dimension (mm) | 3155x3175x1910 |
| Weight | 741 |
| Model Name | BT Edger Trowel |
| Trowel Diameter | 24 Inches |
| Engine Type | Honda GX160 / Equivalent |
| Power | 5.5 HP |
| Trowel Speed | 60–125 RPM |
| Blade Size | 9 x 4 inches |
| Weight | 70 Kg (Approx.) |
| Operating Handle | Foldable with Adjustable Height |
| Application | Edge Finishing of Concrete Floors |
| Country of Origin | India |
| Model | BT Floater 100 |
| Engine Type | Petrol Honda GX160 |
| Power | 5.5 HP |
| Working Width | 1000 mm |
| Blade Size | 350 mm x 150 mm |
| Blade Quantity | 4 |
| Fuel Tank Capacity | 3.6 L |
| Weight | 90 Kg |
| Speed | 70–130 RPM |
| Application | Surface Finishing & Smoothing |
| Model | GX65 Grinding Machine |
| Grinding Wheel Size | 300 mm |
| Power Supply | 3 Phase, 415V |
| Motor Capacity | 5 HP |
| Table Size | 600 x 300 mm |
| Surface Finish | ≤ 2 Micron |
| Max Workload | 200 kg |
| Cooling System | Integrated |
| Material Suitability | Steel, Cast Iron, Alloys |
| Brand | Topall Impex |
| Model | IVC-F33L |
| Type | Industrial Vacuum Cleaner |
| Power | 3300 Watts |
| Voltage | 220V / 50Hz |
| Tank Capacity | 60 Liters |
| Material | Stainless Steel |
| Filter Type | HEPA + Cloth Filter |
| Noise Level | ≤ 78 dB |
| Mobility | 4-Wheel Portable |
| Brand | Topall Impex |
| Model | Sino S300 |
| Type | Surface Grinding Machine |
| Grinding Area | 600 x 300 mm |
| Motor Power | 5 HP |
| Table Load Capacity | 250 kg |
| Voltage | 415V AC |
| Wheel Speed | 2800 RPM |
| Cooling System | Integrated Coolant Tank |
| Operation | Semi-Automatic |
| Brand | Topall Impex |
| Model | HTG-820C |
| Type | Autopilot Planetary Grinder |
| Working Width | 820 mm |
| Grinding Disc | 3 x 300 mm |
| Voltage | 380V / 3 Phase |
| Motor Power | 15 KW |
| Rotation Speed | 350–1950 rpm |
| Weight | 585 kg |
| Water Tank Capacity | 20 Liters |
| Application | Concrete, Stone, Epoxy Floors |
| Model Name | IVC-45L |
| Working Width | 820 mm |
| Grinding Disc | 4 Discs / 12 Heads |
| Motor Power | 15 HP (11 kW) |
| Voltage | 380V-440V 3 Phase |
| Speed Range | 300–1800 RPM |
| Water Tank Capacity | 20 Litres |
| Net Weight | 580 kg |
| Transmission | Gear Drive + Belt Drive |
| Application | Concrete Floor Grinding & Polishing |
| Model | 995 LE |
| Grinding Width | 800 mm |
| Power Output | 15 HP |
| Voltage | 380V, 3-Phase |
| Grinding Disc Speed | 300–1800 RPM |
| Weight | 600 Kg |
| Grinding Pressure | Adjustable |
| Dust Collection Port | Yes |
| Operation Mode | Manual & Auto |
| Application Area | Concrete, Stone, Epoxy Removal |
| Model | GX688-4A |
| Power Output | 15 HP |
| Voltage | 380V |
| Working Width | 680 mm |
| Grinding Heads | 4 |
| Speed | 300–1800 RPM |
| Water Tank Capacity | 30 Liters |
| Machine Weight | 410 Kg |
| Dust Extraction Port | Yes |
| Application Area | Industrial/Commercial Floors |
| Model | GT250 |
| Motor Power | 3 HP |
| Voltage | 220V / 50Hz |
| Grinding Width | 250 mm |
| Disc Speed | 1400 RPM |
| Weight | 65 kg |
| Dust Port | Yes |
| Application Area | Concrete, Marble, Epoxy |
| Frame Material | Heavy-duty Steel |
| Operation | Manual Push Type |
| Model | GT630 |
| Grinding Width | 630 mm |
| Motor Power | 10 HP |
| Voltage | 380V / 3 Phase |
| Speed Range | 300–1800 RPM |
| Working Pressure | Adjustable |
| Tool Holder | 3 Planetary Plates |
| Weight | 340 kg |
| Application | Floor Grinding & Polishing |
| Dust Port | Yes (vacuum compatible) |
| Model | GT330 |
| Motor Power | 4 kW / 5.5 HP |
| Voltage | 380V / 3 Phase |
| Grinding Width | 330 mm |
| Disc Speed | 300–1200 RPM |
| Number of Discs | 3 |
| Weight | 150 kg |
| Water Tank Capacity | 30 L |
| Application | Floor Grinding & Polishing |
| Usage | Industrial / Commercial |
| Model | HTG-460 |
| Grinding Width | 460 mm |
| Motor Power | 4 kW |
| Voltage | 220V / 380V |
| Phase | Single / Three Phase |
| Rotation Speed | 300–1600 RPM |
| Tool Holder Type | Magnetic Plate |
| Water Tank Capacity | 20 Liters |
| Machine Weight | 150 kg |
| Application | Concrete, Terrazzo, Epoxy Floor |
| Model | 580-2 Grinding Machine |
| Power | 7.5 HP |
| Voltage | 380V |
| Working Width | 580 mm |
| Grinding Heads | Dual |
| Weight | 180 Kg |
| Rotation Speed | 300–1800 rpm |
| Water Tank | 30 Liters |
| Application Area | Concrete, Epoxy Removal |
| Usage Type | Industrial / Commercial Floors |
Searching for reliable concrete finishing machine suppliers in Delhi? Topall Impex is a renowned name in offering top-grade construction machinery such as the BT Ride On Trowel. Geared towards professional concrete finishers, our machines provide unparalleled results whether you're undertaking commercial, industrial, or infrastructure projects in Delhi.
We recognize the unique requirements of concrete finishers in Delhi, providing machines that are high-performing but low-maintenance. Our BT Ride On Trowel has gained universal confidence as a result of its efficiency, simple operation, and consistent finish. Being one of the most dependable suppliers of concrete finishing machines in Delhi, we guarantee quick delivery, quality after-sales support, and authentic spare parts.
Our team is experienced in providing services to companies in Delhi in selecting the appropriate troweling solution that suits their budget and project requirements. From lead generation to after-sales service, Topall Impex provides hassle-free service to customers in Delhi and surrounding areas.
If you are projecting your next concrete flooring job and require equipment that delivers performance with precision, toughness, and efficiency, contact us now. Topall Impex is the go-to supplier of BT Ride On Trowel and other concrete finishing equipment in Delhi.