Machinery Portal
Scarifier
Technical Intelligence
Specification
Details
Model
GT 250
Weight (KG)
140
Dimension (MM)
1050 500x100
Working Width (MM)
250
Milling Depth (MM)
1~4
Voltage
415V, 50/60 Hz, 3 phase
Cutter Quantity (PCS)
108
Topall Impex Scarifier is a heavy-duty surface preparation machine built to effectively remove concrete, coatings, and surface dirt with precision and efficiency. Made for heavy-duty use in roadwork and construction projects, the machine possesses great cutting performance, depth control, and surface finish. Contractors extensively use it for its durability and consistent output on even the most difficult surfaces. From stripping traffic lanes to producing non-slip patterns or preparing floors for fresh coatings, our Scarifier gets the job done with minimal downtime.
Technical Variants
| Product Name | Laser Levelling Machine |
| Usage/Application | Concrete Floor Levelling & Industrial Flooring |
| Rated Motor Power | 5.5 HP |
| Drive Type | Electric Drive |
| Voltage | 220–240 V |
| Frequency | 50 Hz |
| Motor Phase | Three Phase |
| Surface Recommendation | Concrete & Industrial Flooring |
| Weight | 280 kg |
| Country of Origin | Made in India |
| Specification | Details |
| Model | FBF33 |
| Blade Size (mm) | L x 200 x 2.8 |
| Handle Length | 1800mm/pс |
| No. of Handle | 3 pcs |
| Material of Blade | Magnesium/Aluminium Alloy |
| Material of Handle | Stainless Steel |
| Bracket | Included |
| Specification | Details |
| Model | FCR33 |
| Blade Size (mm) | 3000 x 100 x 50 |
| Handle Length | 1800mm/pс |
| No. of Handle | 3 pcs |
| Material of Blade | Aluminium Alloy |
| Material of Handle | Stainless Steel |
| Bracket | Included |
| Specification | Details |
| Model | CVS-25 Screed Vibrator |
| Blade Size | 2MTR, 3MTR |
| No. of Handle | 1 |
| Material of Blade | Magnesium /Alloy |
| Drive Mode | Flexible Shaft |
| Power | Honda GX35 / Imported Motor |
| Bracket | - |
| Specification | Details |
| Model | COF 20 |
| Blade Size | 12-20 in |
| Cutting Depth | 160 mm |
| Engine Type | Honda /greaves/electric motor |
| Power/HP | 5/9 hp |
| Water Tank | 35 ltr |
| Weight | 95 kg |
| Specification | Details |
| Model | QUM-96 |
| Working Diameter (mm) | 2440x1140 |
| Engine Type | Dynamic R-999 |
| Max. Output (Hp) | 36 |
| Weight (Kg) | 435 |
| Dimension (mm) | 2540 x 1240x1510 |
| Fuel Tank Capacity | 40 Itr |
| Usage/Application | Power Trowel |
| Working Diameter | 900–1000 mm |
| Dimensions | 1800 × 1000 × 1050 mm |
| Engine Power | 8 – 10 HP |
| Brand | Topall Impex |
| Fuel Tank Capacity | 3 – 5 L |
| Pan Quantity | 1 Piece |
| Blade Quantity | 4 – 6 Blades |
| Working Speed | 70–140 RPM |
| Country of Origin | Made in India |
| Model | QJM 600 |
| Working Diameter (mm) | 600 |
| Engine Type | Honda GX 160 |
| Brand | Topall Impex |
| Weight (Kg) | 60 – 75 kg |
| Dimension (mm) | 1200 × 600 × 900 mm |
| Product Name | High Frequency Vibrators |
| Usage/Application | High Frequency Vibrators |
| Input Voltage | 220 – 415 V |
| Model Name/Number | HVU110 |
| Brand | Topall |
| Output Power | 1.1 kW |
| Input Phase | Three Phase |
| Speed | 12,000 – 14,000 RPM |
| Phase | 3 |
| Country of Origin | Made in India |
| Usage/Application | Hardener Spreader |
| Automation Grade | Semi Automatic |
| Product Type | Surface Finishing Equipment |
| Brand | Topall |
| Capacity | 25–50 kg |
| Material | Mild Steel / Aluminium Body |
| Working Width | 600–1000 mm |
| Minimum order quantity | 1 Number |
| Country of Origin | Made in India |
| Usage/Application | Walk Behind Laser Screed Machines |
| Rated Motor Power | 5.5 – 7.5 HP |
| Surface Recommendation | Concrete Industrial Flooring |
| Drive Type | Hydraulic |
| Power Supply | 380–415 V AC |
| Motor Phase | Three Phase |
| Weight | 250 – 320 kg |
| Brand | Topall Impex |
| Country of Origin | Made in India |
| Specification | Details |
| Model | GT-630 |
| Weight (KG) | 240 |
| Voltage (V) | 380 |
| Working Width (MM) | 600 |
| Inverter (KW) | 7.5 |
| Motor Power (KW) | 7.5 |
| Mill Speed (RPM) | 0-1800 |
| Specification | Details |
| Model | GT460 |
| Motor Power | 4KW |
| Inverter | 14401/min. |
| Power | 380V |
| Weight | 165KG |
| Vaccum Motor Power | 1.8Kw |
| Dimension (LWH) | 1100 x 460 x 980 |
| Working width | 460 MM |
| Grinding wheels | 6 pcs |
| Specification | Details |
| Model | CQF 28 |
| Max Blade Size (Inch) | 16-28 |
| Max Cutting Depth(mm) | 220 |
| Power Type | ENGINE / MOTOR |
| Max Power (hp) | 7.5/10/15 |
| Water Tank (Itr) | 30 |
| Depth Adjustment | Handle Rotation |
| Weight (KG) | 160 |
| Engine / Moto | Greaves/ VST Shakti/ Crompton |
| Specification | Details |
| Model | QUM-80 |
| Blade Quantity | 8 Pcs |
| Pan Quantity | 2 Pcs |
| Working Speed | 120-140rpm |
| Working Diameter | 1900x915mm |
| Engine | Honda GX690 24HP |
| Max Speed | 3600rpm |
| Fuel Tank | 12Ltr |
| Disc Dia | 940mm |
| Spare Parts | Combination Blade |
| Pan | Made of 3mm Thickness, Manganese Steel 2 Pcs. |
| Dimension (mm) | 1980x996x1320 |
| Weight (KG) | 310 |
| Specification | Details |
| Model | CWT 40 |
| Working Diameter (mm) | 1000 |
| Engine Type | Honda GX 160 |
| Max. Output (Hp) | 5.5 |
| Weight (Kg) | 85 |
| Specification | Details |
| Model | BT 900 - 2PF H24 |
| Type | BT Low Riders |
| Engine Type | Honda GX 690, 24HP |
| Blade Rotation Speed | 0-140 Rpm |
| Float Pans | Yes |
| Blades | 8 pcs |
| Dimensions (mm) | 1940×990×1040 |
| Weight Dry (kg) | 275 |
| Usage/Application | Used For Finishing Concrete By Smoothing And Compacting The Surface |
| Model | BT-60H |
| Voltage | 240 V |
| Speed | 300 rpm |
| Working Diameter (mm) | 600 mm |
| Engine Type | Honda GX 160 |
| Power Source | Electric |
| Weight (Kg) | 60 – 75 kg |
| Dimension (mm) | 1200 × 600 × 900 mm |
| Specification | Details |
| Model | BT-90H (Trowel) |
| Working Diameter (mm) | 900 |
| Engine Type | Honda GX 160 |
| Max. Output (Hp) | 5.5 |
| Weight (Kg) | 120 |
| Dimension (mm) | 1280×945×980 |
| Model | BTFC/45/4, BTFC200/18/2 |
| Capacity | 2–15 kVA. |
| Input (Phase/Hz/V/A) | 3 Phase / 50 Hz / 380–415 V / 63–300 A |
| Output (Phase/Hz/V/A) | 3 Phase / 200 Hz / 42–48 V / 80–400 A |
| Weight | 120 – 250 kg |
| Units Driving | 2 Needles, 4 Needles |
| Model | HVU110, HVU220 |
| Voltage | 380–415 V AC. |
| Power (Kw) | 1.1 kW / 2.2 kW |
| Motor Speed | 12,000 – 14,000 RPM |
| Weight | 12–18 kg (HVU110) / 18–25 kg (HVU220) |
| Usage/Application | Material Spreador |
| Material | Stainless Steel |
| Brand | BT2WMS |
| Automation Grade | Semi Automatic |
| Product Type | Hardner Material spreader |
| Roller Type | Semi Automatic |
| Capacity | 100 kg |
| Country of Origin | Made in India |
| Model | LS-325 |
| Generator | 5 – 7.5 kVA Diesel Generator |
| Package | Box 1:2700*1050*1350mm Box2:2900*750*320 |
| Laser Generator | High Precision Rotary Laser |
| Laser Receiver | Digital Laser Receiver System |
| Control System | Automatic Hydraulic Control System |
| Driving System | Hydraulic Drive |
| Airframe Adjustment | Automatic Level Adjustment |
| Slope Working | 0 – 10% Adjustable |
| Wheel Tyre | Heavy Duty Pneumatic Tyres |
| Vibrating System | Hydraulic Vibration System |
| Centrifugal Force | 15 – 30 kN |
| Brand | Topall Impex |
| Scraper Blade | Adjustable Steel Blade |
| Scraper Adjustment | Hydraulic Adjustable |
| Working Length | 2500 – 3000 mm |
| Reverse Speed | 0 – 3 km/h |
| Min. Ground Clearance | 200 mm |
| Ground Flatness | ±2 mm |
| Max Working Radius | 300 m |
| Working | Continuous Laser Controlled |
| Dimension (L*W*H) | 3500 × 2500 × 2000 mm |
| Weight | 800 – 1200 kg |
| Specification | Details |
| Model | LS-400 |
| Engine Model | Honda GX-690 |
| Engine Type | Petrol, V-cylinder engine, air cooling |
| Engine Power (Hp) | 24 |
| Laser Generator | Topcon |
| Lubricating Oil (L) | 2 |
| Fuel Tank Capacity (L) | 35 |
| Type of Leveling | Independent suspension, center rotation |
| Paving Width (mm) | 2500 |
| Paving Way | scraper blade paving |
| Paving Thickness (mm) | 30-200 |
| Boom Motor | High torque hydraulic motor |
| Vibrating System control | Vibrating motor |
| Exciting force (kg) | 100 |
| Vibrational Frequency (hz) | 50 |
| Laser System Control Type | Laser Scanning+ High Sensitivity DC Push road |
| Laser System Control Effect | Flat surface, slope Floor |
| Driving System | Hydraulic driving tyre |
| Wheel | Heavy-duty tyre |
| Walking Speed (km/h) | 0-2.5 |
| Forward/backward | Switch Control, Stepless speed |
| Turing | Switch Control |
| Dimension (mm) | 3155x3175 1910 |
| Weight (kg) | 865 |
| Model Name | Concrete Paver XP-900 |
| Engine Type | Honda GX690 Petrol Engine |
| Engine Power | 24 HP (17.9 kW) |
| Starting System | Electric Start |
| Trowel Diameter | 2 × 900 mm |
| Number of Blades | 8 Blades |
| Blade Speed | 70–150 RPM |
| Drive System | Mechanical / Hydraulic |
| Fuel Tank Capacity | 20–25 L |
| Weight | 320–380 kg |
| Specification | Details |
| Model | BT-60H (EDGER) |
| Working Diameter (mm) | 600 |
| Engine Type | Honda GX 160 |
| Max. Output (Hp) | 5.5 |
| Weight (Kg) | 53 |
| Dimension (mm) | 1460×660×980 |
| Model | BT Floater 100 |
| Engine Type | Petrol Honda GX160 |
| Power | 5.5 – 6.5 HP |
| Working Width | 1000 mm |
| Blade Size | 350 mm x 150 mm |
| Blade Quantity | 4 |
| Fuel Tank Capacity | 3.6 – 5.0 L |
| Weight | 70 – 90 kg |
| Speed | 60–130 RPM |
| Application | Concrete Surface Floating & Finishing |
| Specification | Details |
| Model | GX65 |
| Motor Power | 9.5 KW/13 Hp |
| Working Width | 638 mm |
| Input Voltage | 380 V 3 Phase (20A) |
| Invertor Power | 11 Kw/15 Hp |
| Rotating Speed | 350-1680 rpm |
| Weight | 305 kg |
| Dimension (cm) | 146 × 88 × 132 |
| Specification | Details |
| Model | HTG IVC-33L |
| Motor Power | 3.3 Kw/4.5 Hp |
| Input Voltage | 220 v/110 v |
| Air Sunction | 537 m3/h |
| Hose Diameter | 50/63/80 mm |
| Total Weight | 105 kg |
| Cleaning Way | By Stretch |
| Packing Size (cm) | 88 × 77 × 123 |
| Specification | Details |
| Model | S300 |
| Working Width | 300 mm |
| Motor Power | 5 Hp |
| Voltage | 380V 3 Phase 50Hz |
| Rotating speed | 1450 rpm |
| Weight | 102 kg |
| Air Flow Rate | 180 m3/h |
| Air Pressure | 207 mBar |
| Vacuum Voltage | 220V 4.5 A |
| Capacity | 16L |
| Packing Size (cm) | 120 × 42 × 95 |
| Model | HTG-820C |
| Type | Autopilot Planetary Grinder |
| Working Width | 820 mm |
| Grinding Disc | 3 × 270 mm Discs |
| Voltage | 380 – 415 V |
| Motor Power | 15 – 18 kW |
| Rotation Speed | 300 – 1800 RPM |
| Weight | 480 – 550 kg |
| Water Tank Capacity | 30 – 40 L |
| Application | Concrete Floor Grinding & Polishing |
| Model Name | IVC-45L |
| Type | Industrial Dust Collector / Vacuum Cleaner |
| Motor Power | 5.5 kW (7.5 HP) |
| Voltage | 380–480 V, 3 Phase |
| Filtration System | HEPA H13 + Pre-Separator |
| Vacuum Pressure | 30–35 kPa |
| Maximum Air Flow | 600 m³/h |
| Filter Cleaning | Manual Filter Cleaning |
| Dust Collection | Continuous Drop-Down Dust Bag |
| Brand | Topall Impex |
| Specification | Details |
| Model | 955 LE |
| Working Width | 955 mm |
| Grinding Discs | 270 mm × 4 |
| Power | 18.5KW |
| Water Tank | 39L |
| Drive Mode | Self Propelled / Remote Control |
| Weight | 750 kg |
| Voltage | 380V |
| Packing Size (cm) | 177 × 110 × 120 |
| Specification | Details |
| Model | GX 688-4A (Self Propelled) |
| Motor Power | 15 Kw/20 Hp |
| Working Width | 650 mm |
| Input Voltage | 380V 3P |
| Invertor Power | 15 Kw/20 Hp |
| Rotating Speed | 350-1500 rpm |
| Weight | 410 kg |
| Dimension (cm) | 124 × 74 x 132 |
| Model | GT250 |
| Motor Power | 7.5 – 11 kW |
| Voltage | 380 – 415 V |
| Grinding Width | 250 mm |
| Disc Speed | 1800 – 3600 RPM |
| Weight | 120 – 150 kg |
| Dust Port | Yes |
| Application Area | Concrete Surface Scarifying & Roughening |
| Frame Material | Heavy-duty Mild Steel |
| Operation | Walk Behind / Manual Control |
| Model | GT630 |
| Grinding Width | 630 mm |
| Motor Power | 4 – 5.5 kW |
| Voltage | 220 – 415 V |
| Speed Range | 300–600 RPM |
| Working Pressure | Adjustable |
| Tool Holder | Magnetic / Quick Change Holder System |
| Weight | 180 – 220 kg |
| Application | Concrete Floor Grinding & Surface Preparation |
| Dust Port | Yes (vacuum compatible) |
| Model | GT330 |
| Motor Power | 3 – 4 kW |
| Voltage | 220 – 415 V |
| Grinding Width | 330 mm |
| Disc Speed | 300–1800 RPM |
| Number of Discs | 3 |
| Weight | 120-150 kg |
| Water Tank Capacity | 10-15L |
| Application | Concrete Floor Grinding & Polishing |
| Usage | Small to Medium Area Floor Preparation |
| Model | HTG-460 |
| Grinding Width | 460 mm |
| Motor Power | 4 – 5.5 kW |
| Voltage | 220V / 415V |
| Phase | Single / Three Phase |
| Rotation Speed | 300–1800 RPM |
| Tool Holder Type | Magnetic Plate |
| Water Tank Capacity | 15-20 Liters |
| Machine Weight | 150-180 kg |
| Application | Concrete Floor Grinding & Polishing |
| Specification | Details |
| Model | 580-2 |
| Disc Diameter | 580 mm |
| Motor Power | 7.5 Kw/10 Hp |
| Voltage | 380V 3P |
| Speed | 1460 rpm |
| Weight | 175 Kg |
| Invertor Power | 4 Kw/5.5 Hp |
| Dimension (mm) | 830 × 640 × 1200 |
Searching for an Industrial-Strength Concrete Scarifier Machine with high-performance efficiency and durability? Topall Impex offers you a heavy-duty Scarifier that makes surface preparation tasks easier with accuracy and strength. Our Scarifier is designed to handle tough applications like concrete milling, surface leveling, line striping, and texturing. It has adjustable depth of cut and exchangeable drum assemblies to meet a variety of applications.
Engineered with higher quality engineering, the machine provides consistent performance on any concrete surface. Its torque-rated motor, vibration-dampened construction, and ergonomically located controls make it easy to use and effective for extended hours of use. For roads, warehouses, or business flooring, this Concrete Scarifier Machine is a must-have for contractors wanting dependable performance and minimal maintenance.
At Topall Impex, we take quality as our first priority. Our machines are produced with top-quality components and tested for their performance before sending them out. With unparalleled build quality and post-sales services, we are one of the top Concrete Scarifier Machine manufacturers in India. Take your surface preparation process to the next level with a machine that promises accuracy, speed, and an optimal finish — all the time.